147 ? nic components corp. www .niccomp. com www .lowesr. com www .rfpassives. com www .smtmagnetics. com large can aluminum electrolytic capacitors features low profile (20mm height) low dissipation factor and low esr high ripple current wide cv selection suitable for switching power supplies NRLF series specifications mechanical characteristics: 1. safety vent:: the capacitors are provided with a pressure sensitive safety vent on the top. the vent is designed to rupture in the event that high internal gas pressure is developed by circuit mal func tion or mis-use like reverse voltage. 2. terminal strength: each terminal of the capacitor shall withstand an axial pull force of 4.5kg for a period 10 seconds or a radial bent force of 2.5kg for a period of 30 seconds. notice for mounting the space from the top of the can shall be more than (3mm) from chassis or other construction materials so that safety vent has room to expand in case of emer gen cy. sleeve color: dark blue can top safety vent insulation sleeve and minus polarity marking (4.0mm leads available as option) d+1 max. l 2 6.3 1 0.8 10 (-) (+) maximum ex pan sion for safety vent approx. 3.0mm pc board mounting holes: 10 .1 ? = 2 0.1 d ? 0.5 pc board operating temperature range -40 ~ +85c -25 ~ +85c rated voltage range 16 ~ 250vdc 350 ~ 450vdc rated capacitance range 100 ~ 15,000 f 33 ~ 150 f capacitance tolerance 20% (m) max. leakage current ( a) after 5 minutes (20c) 3 x c( f)v max. tan at 120hz/20c w.v. (vdc) 16 25 35 50 63 80 100 160~450 tan max. 0.50 0.40 0.35 0.30 0.25 0.20 0.20 0.15 surge voltage w.v. (vdc) 16 25 35 50 63 80 100 160 s.v. (vdc) 20 32 44 63 79 100 125 200 w.v. (vdc) 180 200 250 350 400 450 - - s.v. (vdc) 220 250 300 400 450 500 - - ripple current correction factors frequency (hz) 50 60 100 120 500 1k 10k ~ 50k - multiplier at 85c 16 ~ 100vdc 0.93 0.95 0.99 1.00 1.05 1.08 1.15 - 160 ~ 450vdc 0.75 0.80 0.95 1.0 1.20 1.25 1.40 low temperature stability (16 to 250vdc) temperature (c) 0 -25 -40 - - - - - capacitance change -5% -10 -30% - - - - - impedance ratio 1.5 3 9 - - - - - load life test 2,000 hours at +85c capacitance change within 20% of initial measured value tan less than 200% of speci? ed maximum value leakage current less than speci? ed maximum value shelf life test 1,000 hours at +85c (no load) capacitance change within 20% of initial measured value tan less than 200% of speci? ed maximum value leakage current less than speci? ed maximum value surge voltage test per jis-c-5141 (table #6, #4) surge voltage applied: 30 seconds "on" and 5.5 minutes no voltage "off" capacitance change within 20% of initial measured value tan less than 200% of speci? ed maximum value leakage current less than speci? ed maximum value soldering effect refer to mil-std-202f method 210a capacitance change within 10% of initial measured value tan less than speci? ed maximum value leakage current less than speci? ed maximum value precautions please review the notes on correct use, safety and precautions found on pages t10 & t11 of nic?s electrolytic capacitor catalog . also found at www.niccomp.com/precautions if in doubt or uncertainty, please review your speci c application - process details with nic?s technical support personnel: tpmg@niccomp.com rohs compliant includes all homogeneous materials *see part number system for details
148 ? nic components corp. www .niccomp. com www .lowesr. com www .rfpassives. com www .smtmagnetics. com large can aluminum electrolytic capacitors NRLF series standard product list, case size and specifications NRLF 152 m 50v 22x20 f rohs compliant case size (mm) voltage rating tolerance code capacitance code series part number system w.v. cap ( f) case size esr ( ? @ 20c) max. ripple current (arms@85c) 120hz 20khz 120hz 10k ~ 50khz 16 4,700 22x20 0.159 0.135 1.60 1.84 6,800 25x20 0.110 0.093 1.80 2.07 10,000 30x20 0.083 0.070 2.40 2.76 15,000 35x20 0.055 0.047 3.20 3.68 25 3,300 22x20 0.176 0.141 1.60 1.84 4,700 25.x20 0.123 0.099 1.80 2.07 6,800 30x20 0.078 0.062 2.30 2.65 10,000 35x20 0.061 0.049 2.70 3.11 35 2,200 22x20 0.181 0.136 1.40 1.61 3,300 25x20 0.121 0.090 1.70 1.96 4,700 30x20 0.088 0.066 2.00 2.30 6,800 35x20 0.071 0.053 2.40 2.76 50 1,500 22x20 0.254 0.191 1.20 1.38 2,200 25x20 0.173 0.130 1.40 1.612 3,300 30x20 0.116 0.087 1.70 1.96 4,700 35x20 0.081 0.061 2.10 2.42 63 1,000 22x20 0.381 0.286 1.20 1.38 1,500 25x20 0.254 0.191 1.30 1.50 2,200 30x20 0.173 0.130 1.50 1.96 3,300 35x20 0.126 0.094 1.70 1.96 80 680 22x20 0.439 0.329 1.00 1.15 1,000 25x20 0.298 0.244 1.20 1.38 1,500 30x20 0.199 0.149 1.40 1.61 2,200 35x20 0.136 0.102 1.70 1.96 100 470 22x20 0.529 0.344 1.00 1.15 680 25x20 0.366 0.238 1.10 1.27 1,000 30x20 0.249 0.162 1.20 1.38 1,500 35x20 0.177 0.115 1.50 1.73 160 220 22x20 0.980 0.490 0.75 1.05 270 25x20 0.798 0.399 0.87 1.22 390 30x20 0.595 0.298 1.10 1.54 560 35x20 0.414 0.207 1.30 1.82 200 150 22x20 1.326 0.597 0.65 0.91 220 25x20 0.904 0.407 0.87 1.22 330 30x20 0.653 0.294 1.00 1.40 470 35x20 0.459 0.206 1.30 1.82 250 120 22x20 1.658 0.663 0.45 0.63 150 25x20 1.326 0.531 0.65 0.91 220 30x20 0.754 0.301 0.87 1.22 330 35x20 0.553 0.221 1.10 1.54 400 47 22x20 3.527 1.235 0.25 0.35 68 25x20 2.926 1.024 0.35 0.49 100 30x20 1.989 0.696 0.47 0.66 150 35x20 1.326 0.464 0.60 0.84 450 33 22x20 6.028 2.411 0.20 0.28 47 25x20 4.233 1.693 0.29 0.41 68 30x20 2.926 1.17 0.38 0.53 100 35x20 1.989 0.796 0.52 0.73
|
